Hear from Our Customers
Your driveway should improve your home’s value, not become a maintenance headache. When concrete is installed correctly in Mount Arlington, you’re looking at 30 to 50 years of performance with minimal upkeep.
That means proper base preparation, the right concrete mix for New Jersey’s climate, and installation that accounts for drainage from day one. No pooling water. No premature cracking from freeze-thaw damage. No callbacks because the contractor cut corners on the foundation.
You’ll pull into a smooth, level surface that handles Morris County winters without breaking down. Your property looks better. Water drains where it should. And you’re not resealing or patching every few years like you would with cheaper alternatives.
We’ve been installing driveways in Mount Arlington and throughout Morris County for over 20 years. We’re a third-generation, family-owned company that understands what North Jersey weather does to pavement.
We’re not the biggest paving company in the state, and we’re not trying to be. We focus on residential and commercial projects in Morris, Sussex, and Somerset Counties because we know the soil conditions, the drainage challenges, and the freeze-thaw cycles that make or break a driveway here.
When you call, you’ll talk to someone who actually knows Mount Arlington. We’ll show up when we say we will, give you clear pricing upfront, and back our work with a 5-year warranty.
First, we evaluate your property’s drainage and soil conditions. Mount Arlington sits near Lake Hopatcong, and water management matters here. We’ll identify where water flows and design your driveway to work with it, not against it.
Next comes excavation and base preparation. We remove the old surface, grade the area properly, and compact a stone base that won’t shift or settle. This step determines whether your driveway lasts 10 years or 40. We don’t rush it.
Then we pour high-grade Portland cement concrete with rebar reinforcement. The mix is designed for New Jersey’s temperature swings. We control the cure time and apply proper finishing techniques so the surface is smooth but not slippery.
After installation, we explain exactly when you can drive on it and what maintenance (if any) you’ll need over the years. Most customers are surprised how little upkeep a properly installed concrete driveway actually requires.
Ready to get started?
Concrete driveways in Mount Arlington typically run $7 to $13 per square foot installed. That’s higher than asphalt, but you’re paying once instead of resealing every three to five years. A standard two-car driveway (around 600 square feet) costs between $4,200 and $7,800 depending on site conditions and any decorative options you choose.
We also install concrete patios, walkways, and parking areas using the same materials and techniques. If you want stamped concrete patterns or decorative finishes, we can do that too. Those options add to the cost but give you design flexibility that basic asphalt can’t match.
Every project includes proper drainage planning, a compacted stone base, rebar-reinforced concrete, and professional finishing. We pull permits when required and carry full insurance. You’ll get clear pricing before we start, and we guarantee callbacks within 24 to 48 hours if you request a quote online.
Mount Arlington homeowners also ask about Belgard pavers and flagstone options for patios. We install those too, and we’ll walk through the cost and maintenance differences so you can make the right call for your property.
A properly installed concrete driveway in Mount Arlington typically lasts 30 to 50 years with minimal maintenance. The key word is “properly installed.”
North Jersey experiences some of the highest freeze-thaw cycles in the state. When water seeps into cracks, freezes, and expands, it destroys driveways that weren’t built with the right base or concrete mix. That’s why we use Portland cement mixes designed for temperature swings and reinforce with rebar.
The other factor is drainage. If water pools on your driveway or doesn’t drain away from your foundation, you’ll see problems within a few years regardless of material quality. We grade every project to move water where it needs to go. That attention to drainage is what separates a 15-year driveway from a 40-year one.
Asphalt costs $5 to $8 per square foot installed in New Jersey. Concrete runs $7 to $13 per square foot. So yes, concrete costs more upfront.
But asphalt requires sealcoating every three to five years at $200 to $400 per application. Over 20 years, you’re spending an extra $1,000 to $2,000 on maintenance alone. Concrete doesn’t need that. You might reseal it once after 15 years if you want to refresh the appearance, but it’s not required for structural integrity.
The other consideration is lifespan. Asphalt driveways last 15 to 20 years in Morris County if maintained well. Concrete lasts 30 to 50 years. When you factor in replacement costs, concrete often ends up cheaper over the life of your home. It depends on how long you plan to stay and whether you want to deal with ongoing maintenance.
We can pour concrete in cold weather, but there are limitations. Concrete needs to cure properly, and temperatures below 40 degrees slow that process significantly. Below freezing, it won’t cure correctly at all.
In Mount Arlington, that means we typically avoid pours from late November through early March unless we can use cold-weather concrete mixes and protective curing blankets. Even then, it’s not ideal. Spring and fall are the best windows for concrete work in North Jersey.
If your driveway fails in January and you need immediate help, we can do temporary repairs or asphalt patching to get you through winter. Then we’ll schedule the concrete replacement for spring when conditions are right. Rushing a concrete pour in bad weather costs you more in the long run because you’ll be replacing it sooner.
All concrete will eventually develop some hairline cracks. It’s the nature of the material. But large structural cracks that compromise your driveway are preventable with proper installation.
The main causes of serious cracking are poor base preparation, inadequate reinforcement, and bad drainage. We address all three. First, we excavate to proper depth and compact a stone base that won’t shift. Second, we install rebar reinforcement throughout the slab to control cracking. Third, we grade for drainage so water moves away instead of pooling and freezing under the surface.
We also cut control joints into the concrete. These are intentional weak points that guide where minor cracks will form. Instead of random cracks zigzagging across your driveway, you get straight lines in planned locations that are far less noticeable. This is standard practice, but not every contractor does it correctly. The spacing and depth of control joints matter, especially in North Jersey’s climate.
Very little if it’s installed right. You’ll want to keep it clean and avoid using metal shovels or harsh de-icing salts in winter. That’s about it for the first 10 to 15 years.
De-icing salts are the biggest threat to concrete in Mount Arlington. Rock salt and calcium chloride can damage the surface if overused. Sand or calcium magnesium acetate are better options for traction in winter. If you do use salt, rinse the driveway when temperatures rise above freezing.
After 15 to 20 years, you might choose to apply a concrete sealer to protect against moisture and extend the life of the surface. It’s not required, but it can add another 10 years of performance. We can handle that when the time comes, or you can hire any reputable concrete contractor. The sealer application is straightforward and costs a fraction of what you’d spend on asphalt maintenance over the same period.
We can get close, but exact matches are tough with concrete. The color and texture of existing concrete change over time due to weathering, UV exposure, and wear patterns. Even if we use the same mix design, new concrete will look different initially.
That said, we can match stamped patterns, texture finishes, and general color profiles if you want visual consistency across your property. If you’re adding a driveway to a home that already has a concrete patio, we’ll bring samples and show you what’s possible.
The best approach is often to create intentional contrast rather than trying for a perfect match. For example, a smooth concrete driveway with a stamped concrete border can tie into an existing patio without looking mismatched. We’ll walk you through options during the estimate so you know what to expect before we start.
Local Resources
