Hear from Our Customers
You’re tired of looking at cracked pavement every time you pull in. Those puddles that never drain. The way your driveway makes your whole property look neglected, even when everything else is maintained.
A properly installed concrete or asphalt driveway changes that. You get a surface that drains correctly because the grading was done right from the start. You get materials that can handle New Jersey winters without turning into a spiderweb of cracks by spring. And you get a driveway that actually adds value to your property instead of making buyers wonder what else was done cheap.
The difference is in the foundation work. Most contractors skip the proper base preparation because it takes more time and costs them more. We don’t. You get a robust aggregate base, proper compaction, and drainage solutions engineered for Morris County’s clay soils and weather patterns. That’s why our driveways last 20+ years instead of needing repairs every few seasons.
Platinum Paving has been handling driveway installations across Morristown, Madison, Chatham, and the rest of Morris County since the early 2000s. We’re a family-owned operation, which means the person you talk to actually understands the work being done.
We know Morris County properties. The soil conditions that require extra base work. The drainage challenges that come with older neighborhoods in Morristown’s historic districts. The HOA requirements in newer developments around Parsippany and Florham Park.
You’re not getting a crew that learned paving in Florida and doesn’t understand freeze-thaw cycles. You’re getting contractors who’ve spent two decades solving the specific problems that come with paving in North New Jersey.
We start with a site evaluation at your property. We’re looking at drainage patterns, soil conditions, the grade of your lot, and how your driveway connects to the street. This determines whether you need additional base work or drainage solutions.
Next, we give you a clear quote. You’ll see the cost per square foot, what materials we’re using (high-grade HMA for asphalt or Portland cement with rebar reinforcement for concrete), and how long the job will take. No vague estimates. If you want decorative stamped concrete instead of standard broom finish, we’ll show you pattern options and the cost difference.
Once you approve, we schedule the work and stick to that schedule. We remove your existing driveway if needed, excavate to proper depth, install and compact the aggregate base, set up forms for concrete pours, and then install your new surface. For concrete, that means proper finishing and curing time. For asphalt, that means applying HMA at the right temperature for proper compaction.
You get a callback within 24-48 hours after requesting a quote online. The actual installation timeline depends on size and complexity, but most residential driveways in Morristown take 3-5 days from excavation to final surface.
Ready to get started?
Concrete driveways in Morris County run $7-12 per square foot installed. You’re looking at higher upfront cost than asphalt, but concrete lasts 30-40 years with minimal maintenance. We install standard broom finish or decorative stamped concrete that mimics pavers, brick, or stone patterns. Concrete works well if you want a lighter-colored surface that doesn’t absorb as much heat or if your property has a more formal aesthetic.
Asphalt costs $3.50-6 per square foot and makes sense if you want faster installation and lower initial investment. It needs resealing every few years and typically lasts 20-25 years in New Jersey’s climate. We use high-grade hot mix asphalt applied at proper temperature, not the recycled mix some contractors use to cut costs.
Both options include proper site preparation, which matters more than the surface material. That means excavation to correct depth, a compacted aggregate base (usually 6-8 inches for residential driveways), proper grading for drainage, and installation that accounts for Morris County’s freeze-thaw cycles. We also handle concrete patios, walkways, and other flatwork if you’re updating multiple areas at once.
The choice between concrete and asphalt usually comes down to budget, aesthetic preference, and how long you plan to stay in the property. We’ll walk through both options during your consultation so you can make the decision that actually makes sense for your situation.
Concrete driveway installation in Morristown typically runs $7-12 per square foot, which puts a standard two-car driveway (about 600 square feet) between $4,200 and $7,200. That’s for basic broom-finish concrete with proper base preparation and rebar reinforcement.
Decorative stamped concrete costs more, usually $10-15 per square foot, because it requires additional labor for pattern work and coloring. If your property has drainage issues, steep grades, or difficult access, expect to add 15-20% to account for extra site work.
New Jersey pricing runs higher than national averages due to labor costs and material expenses in the Northeast. But you’re also dealing with harsher weather conditions that require better materials and installation practices. Cutting corners to save $1,000 upfront usually means you’re repaving in 10 years instead of 30.
Concrete costs more upfront but lasts 30-40 years with almost no maintenance beyond occasional cleaning. Asphalt costs 30-40% less initially but needs resealing every 3-5 years and typically lasts 20-25 years in New Jersey’s climate.
Go with concrete if you want a lighter-colored surface, plan to stay in your home long-term, or prefer the look of stamped patterns. It handles Morris County’s freeze-thaw cycles well and doesn’t soften in summer heat. The higher initial cost evens out over the lifespan when you factor in asphalt maintenance.
Choose asphalt if you’re working with a tighter budget, need faster installation (asphalt cures quicker than concrete), or prefer the traditional dark appearance. It’s also easier to repair if you do get cracks, though proper installation should minimize that issue. Both materials work fine in Morristown—it really comes down to your budget timeline and aesthetic preference.
Most residential concrete driveways in Morristown take 3-5 days from start to finish. Day one is excavation and base preparation. Day two is forming and rebar placement. Day three is the concrete pour and finishing. Then you need 5-7 days of cure time before you can drive on it.
Weather affects the timeline. We don’t pour concrete if temperatures will drop below 40°F within 48 hours or if heavy rain is forecast. Morris County’s spring and fall weather can push schedules back a few days.
Larger driveways or complex jobs with significant drainage work, retaining walls, or decorative stamping take longer. We’ll give you a specific timeline during your consultation based on your property’s conditions. What we don’t do is rush the job to hit an arbitrary deadline—concrete that’s poured wrong or doesn’t cure properly will crack within a year.
Poor base preparation causes most concrete cracking in Morris County. If the aggregate base isn’t thick enough, properly compacted, or graded for drainage, the concrete settles unevenly and cracks. New Jersey’s freeze-thaw cycles make this worse—water gets under the slab, freezes, expands, and pushes the concrete up.
Skipping control joints is another common mistake. Concrete will crack as it cures and expands with temperature changes. Control joints give it designated places to crack so you get clean lines instead of random spiderweb patterns across your driveway.
Using the wrong concrete mix or pouring in bad weather also leads to premature cracking. We use Portland cement mixes designed for New Jersey’s climate with proper water-cement ratios and rebar reinforcement. Some contractors water down the mix to make it easier to work with, which weakens the final product. Others pour too late in the season when overnight temperatures drop too low for proper curing. Both approaches save the contractor time or money but leave you with a cracked driveway in two years.
Most driveway replacement projects in Morristown require a permit from the town’s Building Department, especially if you’re changing the driveway’s footprint, altering drainage patterns, or connecting to a public street. The permit process ensures the work meets local codes for setbacks, drainage, and stormwater management.
If you’re just repaving an existing driveway in the same location without changing its size or grade, you might not need a permit. But it’s worth confirming with the town before starting work. Morristown’s historic district has additional requirements, and some neighborhoods have HOA rules about driveway materials and appearance.
We handle permit applications as part of our service. We know what Morristown’s Building Department requires, what documentation they want, and how long approval typically takes. Trying to skip the permit process might save a few hundred dollars upfront, but it creates problems when you sell your property or if a neighbor complains. Better to do it right from the start.
We can pour concrete in winter, but only if conditions are right. Concrete needs temperatures above 40°F for at least 48 hours after pouring to cure properly. If it freezes before curing, the water in the mix expands and weakens the concrete’s structure permanently.
Late fall and early spring in Morris County are usually fine for concrete work. We monitor weather forecasts closely and use insulating blankets or curing blankets if temperatures drop at night. True winter months (December through February) are risky in New Jersey—even if you get a warm week, overnight temps often dip too low.
Asphalt has similar limitations. HMA needs to be applied at 300°F and requires warm ground temperatures for proper compaction. Cold weather causes the asphalt to cool too quickly before we can compact it properly. Most paving contractors in Morristown shut down concrete and asphalt installation from late November through March. We’ll schedule your project for optimal conditions rather than rush a winter installation that won’t last.
Local Resources
