Hear from Our Customers
You get a driveway that doesn’t crack, settle, or turn into a maintenance nightmare after the first hard winter. No more avoiding puddles or apologizing to guests about the rough surface.
Quality asphalt paving means proper drainage that directs water away from your foundation. It means a base that won’t shift under New Jersey’s freeze-thaw cycles. Most importantly, it means decades of reliable performance instead of repeated repairs.
When it’s done right the first time, your driveway becomes an asset that adds real value to your property—not a source of stress every spring when you assess winter damage.
At Platinum Paving, we’ve watched too many Lewisburg homeowners deal with failed driveways because the original contractor cut corners on base preparation or used inadequate materials for our climate.
We’re not the cheapest option, and there’s a reason for that. Quality materials cost more. Proper excavation and base preparation take time. Professional equipment and experienced crews command fair wages.
But here’s what you get for that investment: a driveway that protects your property value instead of detracting from it. In an area where median home values exceed $400,000 and property taxes are among the nation’s highest, that protection matters.
We start with drainage evaluation because water destroys even the best asphalt. Poor drainage is the number one cause of premature failure in New Jersey driveways.
Proper excavation comes next. We remove inadequate material and grade for water flow away from your foundation. The stone base gets installed in lifts and compacted to specifications—not just dumped and spread.
Asphalt installation requires the right temperature, proper thickness, and professional compaction. We use commercial-grade equipment and monitor temperatures throughout the process. Edge details, transitions, and final grading all receive the same attention to ensure long-term performance.
Ready to get started?
Professional asphalt paving includes comprehensive site evaluation, drainage analysis, and base design appropriate for local soil conditions. In Lewisburg, NJ, seasonal ground movement and temperature extremes require specific approaches.
We account for the clay soils common in this area that expand and contract with moisture changes. Base preparation includes proper depth calculations and material selection that prevent settling and heaving.
Your project includes professional-grade materials, proper compaction equipment, and attention to details like edge support and water management. We also provide maintenance guidance, including optimal timing for sealcoating to maximize surface protection and extend service life.
Most residential driveway projects require 2-3 days from start to finish. Day one involves excavation, base preparation, and proper grading. Day two covers stone base installation and compaction. Asphalt installation typically happens on day three, weather permitting.
We won’t install asphalt in temperatures below 50 degrees or when rain is forecast within 24 hours. Quality installation requires optimal conditions, which sometimes means adjusting schedules for weather.
You can walk on new asphalt immediately, but wait 24-48 hours before driving light vehicles. Heavy trucks should wait at least one week. We provide specific guidelines based on your installation thickness and current weather conditions.
Repair works for isolated issues like small cracks or minor surface problems. Full replacement becomes necessary when the base has failed, when drainage problems exist, or when more than 30% of the surface shows significant damage.
In New Jersey’s climate, surface cracking often signals deeper problems. Water infiltration through cracks reaches the foundation layer, causing the heaving and settling that repair can’t address long-term.
We evaluate existing conditions honestly and explain whether repair will provide lasting results or if replacement makes better financial sense. Sometimes investing more upfront prevents thousands in repeated repairs over the next five years.
Complete driveway replacement typically costs $8-15 per square foot, depending on excavation requirements, drainage work, and site accessibility. A standard two-car driveway ranges from $4,000-8,000 for professional installation.
Costs vary significantly based on existing conditions. Properties with poor drainage, unstable soil, or difficult access require additional work that increases the total investment but prevents future problems.
Our detailed estimates break down excavation, base materials, asphalt, and labor costs separately. This transparency helps you understand exactly what you’re paying for and why proper installation requires specific steps and quality materials.
New asphalt needs 6-12 months to cure before the first sealcoating application. This allows oils in the asphalt to properly oxidize and the surface to achieve full hardness.
After initial sealcoating, reapplication every 2-3 years provides optimal protection against New Jersey’s weather extremes. Regular sealcoating prevents oxidation, blocks water penetration, and protects against UV damage that leads to surface cracking.
Application timing matters significantly. Spring and fall offer ideal conditions—temperatures between 55-80 degrees with no precipitation forecast for 24 hours. We track installation dates and provide maintenance reminders when your driveway is ready.
Freeze-thaw cycles are the primary culprit. Water enters small surface cracks, freezes, expands, and creates larger cracks that allow deeper water penetration. This cycle repeats until major structural damage occurs.
Poor drainage accelerates the process dramatically. Standing water saturates the base layer, causing settling and undermining that creates stress cracks throughout the surface.
Inadequate base preparation is another major cause. Without proper stone base depth and compaction, asphalt surfaces lack adequate support and develop stress cracks under normal traffic loads. Professional installation with appropriate base design prevents most cracking issues.
Yes, we provide comprehensive written estimates at no cost. Our evaluation includes drainage assessment, accurate measurements, and identification of any site-specific challenges that affect project scope and pricing.
The estimate process takes 20-30 minutes on-site. We assess existing conditions, discuss your specific needs, and explain our recommended approach. You receive a detailed written estimate within 24 hours.
We typically schedule estimates within 2-3 business days of your call. The written estimate includes material specifications, project timeline, and warranty information, giving you everything needed to make an informed decision about your asphalt paving project.
Local Resources
